What is up with Google? We have hundreds of messages waiting moderation on the BeagleBoard Google Group, but the tool no longer enables message moderation---and absolutely no communications from Google. Have they simply bitten off more than they can chew? Are they trying to take too much control? Either way, I'm shopping for a new mailing list solution for BeagleBoard.org and, sorry, 99% of your suggestions aren't useful. We need low-setup costs, low/free hosting, long-term archival, excellent search tools and results in various engines, quality spam controls, easy-to-use moderation tools, forum-like thread organization and "top-pinning", digest and individual e-mails with threading and many more features for which Google Groups has barely been passable at this point.
Any thoughts on why this has happened and if Google will be a valid partner in the future?
Saturday, March 31, 2012
Tuesday, September 6, 2011
BeagleBoard on The Amp Hour and at ESC Boston
This week, I went on the Amp Hour with Chris, Dave and Jeff. We spoke about a lot of things BeagleBoard related, including the upcoming next revision of the BeagleBoard.
Also, I wanted to remind everyone that there will be new hands-on training at ESC Boston this month and full-conference attendees will get a free BeagleBoard-xM, TinCanTools Beacon Board and TI MSP430 Chronos watch.
Lastly, I'm still on the look-out for a new primary host for the BeagleCast podcast. I will be recording another episode next week with Khasim Syed Mohammed regarding the Android Rowboat project (hopefully), but I'm looking for someone who can volunteer to organize and record/publish the shows on a regular basis. The audio recording must be of higher quality than we've done in the past.
Also, I wanted to remind everyone that there will be new hands-on training at ESC Boston this month and full-conference attendees will get a free BeagleBoard-xM, TinCanTools Beacon Board and TI MSP430 Chronos watch.
Lastly, I'm still on the look-out for a new primary host for the BeagleCast podcast. I will be recording another episode next week with Khasim Syed Mohammed regarding the Android Rowboat project (hopefully), but I'm looking for someone who can volunteer to organize and record/publish the shows on a regular basis. The audio recording must be of higher quality than we've done in the past.
Friday, July 29, 2011
BeagleBoard turns 3.0!
Linux is turning 20 years old this year and Linus has released version 3.0. You can try 3.0 out on the BeagleBoard or BeagleBoard-xM prior to rev C and it should work for you pretty well. Support for xM rev C was merged after the 3.0 release for inclusion in 3.1. If you'd like to pull a patch set that gives you power management, 1GHz support and some other features not yet placed into the mainline yet, you can check out the patch set in the meta-texasinstruments OE repository. Koen also has also released a set of pre-build binaries and modules using these kernel patches if you want to try out a fairly full-featured 3.0 kernel build for the BeagleBoard/BeagleBoard-xM.
I haven't tried it out yet, but the Linaro 11.06 Android evaluation build also includes a 3.0 kernel for your BeagleBoard-xM.
Happy Beagle 3.0!!!!
Tuesday, May 10, 2011
BeagleCast 2011-05-06: Talking ARM with Greg K-H
Today we interview Greg Kroah-Hartman and your hosts are Jason Kridner and Jeffery Osier-Mixon. Gerald will be back in two weeks.
To provide questions or suggestions:
- Call +1-713-234-0535 or
- visit the BeagleCast suggestions form
Links to show topics
- Some in stock @ Digi-Key this week!
- A 300ms BeagleBoard boot?
- Using git submodule and busybox to track mainline development
- Announcing the Level One eXpansion (LOX) Board
- BeagleBoard at Embedded Linux Conference (CATCAN, Gumstix Stagecoach, SuperJumbo, Avnet, and WLAN hacking)
- Always Innovating talk at the 2011 Embedded Linux Conference
- Sandia cluster of 49 OMAP3s
- TI introduces OpenLink
- Processing and Processing-JS on the BeagleBoard under Angstrom
- BeagleBoard based oscilloscope using JavaScript and Processing.JS
- Arduino IDE and upload with avrdude to Trainerboard (AVRISP2)
- Processing on Beagleboard xM
- Making Processing/Arduino IDE/ReplicaorG work on ARM
- Android Oscilloscope on the Beagleboard xM using Rowboat
- Maker Faire Bay Area, May 21-22, 2011
- ESC Chicago, June 6-8, 2011
- Stompbox Design Summer Workshop at Stanford University, July 18-July 22, 2011
Wednesday, March 30, 2011
Indiana Linuxfest and the CATCAN quadpod
I was at Indiana Linuxfest this weekend. A couple of BeagleBoard-xMs were raffled off in support of the conference and it seemed a lot of people were interested. I gave a brief talk about the BeagleBoard project, Mark Yoder from Rose-Hulman and his students gave hands-on training to those interested in the Hackerspace Village and we had a BeagleBoard.org table for part of Saturday.
On Friday before I left for the show, I got a package from CATCAN in Taiwan containing two BeagleBoard-based robots and not much else; certainly nothing else I understood. I left the hexpod at home to make sure it wasn't damaged and took the quadpod with me. Sitting at the table, a group gathered and we figured out what we thought was the right way to connect the battery. The first thing we noticed was this ominous shrill after applying power. As we sat nervously wondering what was going to happen when we applied power, one person sitting at the Linux in the Ham Shack table noted a resemblance of the bot to the evil metal spiders in Dr. Who.
We decided that the shrill was likely the fans in the servo motors. You can block it out after a while, but it is loud and frightening. There was some concern that this meant that the servos were under strain, especially given that the motors were all moving themselves in addition to the legs, but I'm pretty sure we ruled that out and it really is the fans.
Knowing from the CATCAN and BeagleBoard.tw websites that this bot was running Android, a random group of us sitting around the table decided to hook up a serial port and tried to figure out what made the bot move. Being Android without any additional GNU utilities in the file system, the shell can be a bit frustrating. We couldn't hit backspace or perform tab completion. However, obvious commands, like 'ls', 'cd' and 'cat' are there so we could go about our exploring.
One of the first files we found was a log in /data/dontpanic. We found that quite reassuring. Eventually we found /system/etc/init.hexapod.sh and the fact that it pointed to executing /data/test-long-time-hexapod. Sure enough, running that executable sent our bot back through its motions. Running it from the shell gave us a printout of 13 different numerical values--the same number of motors on the bot. Eventually, I'll need to figure out how to recharge this bot--unless I have somehow underestimated its capabilities. I'm still a bit away from figuring out how to give it my own directions, but I think I have a start now--thanks to the attendees of Indiana Linuxfest!
It wasn't all games on the show floor, I also enjoyed a few of the talks. I especially enjoyed the presentation on Open Hardware by Joshua Burton. I am anxious to figure out what I can do with a Bug or BeagleBoard and the realtime sensor data aggregator Panchube. Joshua also introduced me to the work of Rodney Brooks who, among other interesting things, contributes to Edge.
I also picked up a bit I didn't realize in the Ubuntu for ARM presentation by David Mandella. One thing that surprised me is that the 10.04 release for ARM isn't considered "LTS" or long term supported. David predicts that the 12.04 is likely to be the first LTS release for ARM. With the Linaro work on the device tree and lots of OMAP/BeagleBoard patches being accepted into the mainline Linux kernel, I expect that to be a stellar release for the BeagleBoard users out there.
The presentations were recorded, so hopefully I'll be able to provide an update with the recorded presentations.
Update (3/30/2011): Sog Yang gave me this link to find a charger: http://www.rc-airplanes-simplified.com/rc-battery-chargers.html
On Friday before I left for the show, I got a package from CATCAN in Taiwan containing two BeagleBoard-based robots and not much else; certainly nothing else I understood. I left the hexpod at home to make sure it wasn't damaged and took the quadpod with me. Sitting at the table, a group gathered and we figured out what we thought was the right way to connect the battery. The first thing we noticed was this ominous shrill after applying power. As we sat nervously wondering what was going to happen when we applied power, one person sitting at the Linux in the Ham Shack table noted a resemblance of the bot to the evil metal spiders in Dr. Who.
We decided that the shrill was likely the fans in the servo motors. You can block it out after a while, but it is loud and frightening. There was some concern that this meant that the servos were under strain, especially given that the motors were all moving themselves in addition to the legs, but I'm pretty sure we ruled that out and it really is the fans.
Knowing from the CATCAN and BeagleBoard.tw websites that this bot was running Android, a random group of us sitting around the table decided to hook up a serial port and tried to figure out what made the bot move. Being Android without any additional GNU utilities in the file system, the shell can be a bit frustrating. We couldn't hit backspace or perform tab completion. However, obvious commands, like 'ls', 'cd' and 'cat' are there so we could go about our exploring.
One of the first files we found was a log in /data/dontpanic. We found that quite reassuring. Eventually we found /system/etc/init.hexapod.sh and the fact that it pointed to executing /data/test-long-time-hexapod. Sure enough, running that executable sent our bot back through its motions. Running it from the shell gave us a printout of 13 different numerical values--the same number of motors on the bot. Eventually, I'll need to figure out how to recharge this bot--unless I have somehow underestimated its capabilities. I'm still a bit away from figuring out how to give it my own directions, but I think I have a start now--thanks to the attendees of Indiana Linuxfest!
It wasn't all games on the show floor, I also enjoyed a few of the talks. I especially enjoyed the presentation on Open Hardware by Joshua Burton. I am anxious to figure out what I can do with a Bug or BeagleBoard and the realtime sensor data aggregator Panchube. Joshua also introduced me to the work of Rodney Brooks who, among other interesting things, contributes to Edge.
I also picked up a bit I didn't realize in the Ubuntu for ARM presentation by David Mandella. One thing that surprised me is that the 10.04 release for ARM isn't considered "LTS" or long term supported. David predicts that the 12.04 is likely to be the first LTS release for ARM. With the Linaro work on the device tree and lots of OMAP/BeagleBoard patches being accepted into the mainline Linux kernel, I expect that to be a stellar release for the BeagleBoard users out there.
The presentations were recorded, so hopefully I'll be able to provide an update with the recorded presentations.
Update (3/30/2011): Sog Yang gave me this link to find a charger: http://www.rc-airplanes-simplified.com/rc-battery-chargers.html
Monday, March 28, 2011
BeagleCast 2011-03-25: Super Jumbo
The theme of today's show is "Super Jumbo" and your hosts are Jason Kridner, Gerald Coley and Jeffery Osier-Mixon.
To provide questions or suggestions:
- Call +1-713-234-0535 or
- visit the BeagleCast suggestions form
Headline news
- Windows Compact 7
- Two new Distributors in China -- ChipSee -- CATCAN
- FFmpeg fork becomes libav
- Clojure on The Beagleboard -- What is a closure vs. what is Clojure?
- The 2.6.38 kernel is out
- What Is CLFS? - File System - Check!
- OpenEmbedded at CeBIT 2011 -- Should we still be excited about CES and CeBIT?
- Face chasing BeagleBoard-based robot using a Kinect
- How to build QT Framework 4.7.2 and OpenCV 2.2 for Beagleboard-xM -- How to build sample program for capturing image from camera (OpenCV and Qt)
- SPI with Trainer-xM
- Running CyanogenMod on BeagleBoard -- What is CyanogenMod? -- What is Rowboat?
- NEWS IGEPv2 goes Open Hardware
- Open Hardware Summit date announced for 2011? -- Looking for votes on a logo
- Beagleboard: Power usage (current draw) for certain scenarios
Community activity
- GSoC Update -- BeagleBoard.org not a mentoring organization this year -- Still looking for mentors to volunteer to mentor in other projects -- Considering a smaller scale BeagleBoard Summer of Code
- Always Innovating Announcement...Super Jumbo Beagle Buffet!
- Khasim Syed Mohammed will be on next week to discuss the Android Rowboat project
Tuesday, March 15, 2011
BeagleCast 2011-03-14: BeagleBoard-xM rev C
Today's hosts are Jason Kridner, Gerald Coley and Jeffery Osier-Mixon. Below are the show note links.
Links to the recordings
To provide questions or suggestions:
- Call +1-713-234-0535 or
- visit the BeagleCast suggestions form
- Running a BeagleBoard off of Batteries
- BeagleBoard cases with a MakerBot on Thingiverse
- New SGX Graphics Driver Release 4.03.00.02 for Linux now available!
- DVI-D to VGA converter for BeagleBoard-xM and issue to be fixed with the current BeagleBoardToys VGA adapter when using a BeagleBoard-xM
- Kinect + BeagleBoard-xM (now need GLES)
- Leverett and Wasson Win Texas Instruments Beagle Board Design Challenge
- Toolchain, Check! Kernel, Check! - Cross Linux From Scratch
Upcoming events
- Tweet @Jadon for free BeagleBoard hands-on training on March 26th at Indiana Linuxfest going on March 25-27
- Linux Collaboration Summit on April 6-8
- Embedded Linux Conference on April 11-13
- Maker Faire Bay Area on May 21-22
- New release candidate from Angstrom
- FAT vs. ext2
- boot.scr vs uEnv.txt change is not welcomed by all
- Why won't old MLO and u-boot work with xM rev C?
- Mark Yoder's ECE497 class with some students using the Kinect
- Collecting Google Summer of Code project ideas such as the car PC project
The theme music for BeagleCast was created and provided by Alasdair Drake.
Subscribe to:
Posts (Atom)